Switch Controls 2 To 18 GHz

March 4, 2010
Model SP133DHS is a single-pole, three-throw (SP3T) reflective switch from Narda Microwave-East with fast switching speed and low loss from 2 to 18 GHz. It features as much as 65 dB isolation with switching speed of 15 ns. The insertion loss is 2.6 dB ...

Model SP133DHS is a single-pole, three-throw (SP3T) reflective switch from Narda Microwave-East with fast switching speed and low loss from 2 to 18 GHz. It features as much as 65 dB isolation with switching speed of 15 ns. The insertion loss is 2.6 dB from 2 to 12 GHz and 2.9 dB from 12 to 18 GHz. The maximum VSWR is 2.0:1. The rugged switch can handle as much as 200 mW RF power and can survive input power levels to 1 W CW and 20 W peak power with a 1-microsecond pulse at 5-percent duty cycle. The switch operates from +5 VDC at 110 mA and -12 VDC at 70 mA and measures 1 x 1.2 x 0.3 in. without connectors. It is reverse-voltage protected and includes TTL drivers and a BCD decoder driver. The switch meets MIL-STD-202F for humidity, shock, vibration, and thermal shock, and is ideal for electronic-warfare (EW) simulators and in test systems.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.