Two-Way Power Divider Channels 2 To 8 GHz

Sept. 9, 2009
Coupler specialist Krytar recently announced the development of its model 6020080 Wilkinson two-way power divider for applications from 2 to 8 GHz. The power divider exhibits maximum VSWR of 1.45:1 at any port with less than 0.8-dB insertion loss. The ...

Coupler specialist Krytar recently announced the development of its model 6020080 Wilkinson two-way power divider for applications from 2 to 8 GHz. The power divider exhibits maximum VSWR of 1.45:1 at any port with less than 0.8-dB insertion loss. The port-to-port isolation is 19.5 dB. The broadband power divider features amplitude tracking between ports that is within 0.25 dB and phase tracking that is within 5 deg. The two-way power divider, which can be manufactured to meet military requirements, is supplied with SMA female connectors.

Continue Reading

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

New

Most Read

Sponsored