GaAs Multipliers Reach 90 GHz

April 9, 2009
Hittite Microwave Corp. has introduced a trio of GaAs MMIC frequency multipliers for bands from 8 to 90 GHz. Model HMC695LP4E is an active X4 surface-mount frequency multiplier that operates from 11.4 to 13.2 GHz. It draws about 60 mA from a +5-VDC ...
Hittite Microwave Corp. has introduced a trio of GaAs MMIC frequency multipliers for bands from 8 to 90 GHz. Model HMC695LP4E is an active X4 surface-mount frequency multiplier that operates from 11.4 to 13.2 GHz. It draws about 60 mA from a +5-VDC supply and delivers +7 dBm output power with -25 dBc harmonics. Its phase noise is -140 dBc/Hz offset 100 kHz from the carrier. Model HMC-C056 is a X2 frequency multiplier module with connectors that works from 8 to 21 GHz. It yields +14 dBm output power with a +6-dBm input level and has phase noise of -142 dBc/Hz offset 100 kHz from the carrier. Model HMC-XTB110 is a passive X3 frequency multiplier chip that provides coverage from 72 to 90 GHz. It replaces the firm's model HMC-XTB106.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.