Switch Matrix Runs 950 To 2150 MHz

March 23, 2011
In spite of its long model number, the MS-5000-16X16-LB-FO switch matrix system from CrossPoint Technologies, is a low-profile, 1U rack-mount unit with typical isolation of 65 dB from 950 to 2150 MHz. The broadband switch matrix offers typical gain of 0 ...

In spite of its long model number, the MS-5000-16X16-LB-FO switch matrix system from CrossPoint Technologies, is a low-profile, 1U rack-mount unit with typical isolation of 65 dB from 950 to 2150 MHz. The broadband switch matrix offers typical gain of 0 dB (no loss) with a typical noise figure of 8 dB and typical VSWR of 1.80:1.

The system has a typical 1-dB compression point of 0 dBm with a typical output third-order intercept point of +10 dBm and typical output second-order intercept point of +20 dBm. It operates on 80 to 264 VAC and consumes 50 W or less power.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...