Diplexers Developed For Inmarsat Transceivers

July 31, 2007
Integrated Microwave has developed a line of low-cost, high-performance diplexers for Inmarsat satellite communications transceivers at 1542 and 1642 MHz. The low-profile, surface-mount diplexers feature transmit insertion loss of less than 1 dB and ...

Integrated Microwave has developed a line of low-cost, high-performance diplexers for Inmarsat satellite communications transceivers at 1542 and 1642 MHz. The low-profile, surface-mount diplexers feature transmit insertion loss of less than 1 dB and receive insertion loss of less than 1.2 dB. The elliptic function of the diplexers provides more than 55-dB interchannel rejection for the 34-MHz-wide channels. The ceramic diplexers can handle power levels to 30 W CW. They measure a mere 2.0 x 1,06 x 0.44 inches with package tabs. For more information on these Inmarsat diplexers, visit the Integrated Microwave website at:
http://www.imcsd.com

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...