Mwrf 494 Crystek 0

VCO Maintains 3200 MHz Output

July 11, 2012

Model CVCO55CCQ-3200-3200 is a voltage-controlled oscillator (VCO) that operates at a center frequency of 3200 MHz. Its frequency is adjusted by a control voltage range of 0.5 to 4.5 V. The oscillator has typical phase noise of −115 dBc/Hz offset 10 kHz from the carrier. It delivers typical output power of +6 dBm with second-harmonic suppression of typically −12 dBc. Pushing and pulling are minimized to 0.3 MHz and 0.1 MHz/V, respectively. The VCO, which is supplied in a 0.5 x 0.5 in. SMD surface-mount package, draws maximum current of 27 mA from a +6-VDC supply. It is ideal for use in digital radios, fixed wireless access, cellular base stations, and in satellite-communications (satcom) systems.

Crystek Corp., 12730 Commonwealth Dr., Ft. Myers, FL 33913; (800) 237-3061, (239) 561-3311, FAX: (239) 561-1025, e-mail: [email protected], www.crystek.com.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.