Mwrf 1284 Pasternack 0

Broadband Amps Reach 18 GHz

April 28, 2014
A line of 1- and 2-W broadband amplifiers includes models to 18 GHz.

A line of 1- and 2-W broadband amplifiers from Pasternack includes models for coverage from 2 to 18 GHz. For example, model PE15A4005 provides +30-dBm output power at 1-dB compression (1 W) from 2 to 6 GHz with 33-dB small-signal gain and ±1-dB gain flatness. It achieves an output third-order intercept point (OIP3) of +39 dBm with noise figure of 5 dB. The input and output VSWR are 2.0:1. The amplifier draws 1 A current from a +12-VDC supply. At the high-frequency end, model PE15A3507 provides +30 dBm output power (1 W) at 1-dB compression from 12 to 18 GHz with 43-dB small-signal gain and ±2-dB gain flatness. It has a noise figure of 6 dB. Both amplifiers are rated for operating temperatures of -55 to +85°C.

Pasternack, 17802 Fitch, Irvine, CA 92614; (866) 727-8376, (949) 261-1920, FAX: (949) 261-7451

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.