Cables Help Jam Radio-Controlled IEDs

Oct. 7, 2010
Coaxial cables may seem like a simple means of transferring signals between two points in a system. But to the United States troops that rely on counter radio-controlled electronic warfare (CREW) systems overseas, coaxial cables are critical to the ...

Coaxial cables may seem like a simple means of transferring signals between two points in a system. But to the United States troops that rely on counter radio-controlled electronic warfare (CREW) systems overseas, coaxial cables are critical to the performance of the systems used to jam radiocontrolled improvised explosive devices (IEDs). Over 150,000 cables built in the MegaPhase MegaPhase facility in Stroudsburg, PA, for example, support the operation of jamming systems in numerous warfi ghter vehicles, including MRAP, M-ATV, Stryker, Paladin, and HWMMVs. The hidden explosives are typically detonated by simple radio transmitters, including cellular telephones, and the jammers can prevent the detonation signals from reaching an IED's receiver at detectable levels above the noise.

According to a United States Army spokesperson, "MegaPhase's RF cables and connectors have already and will continue to directly impact and save the lives of over 30,000 people. As a vital supplier to the war effort that requires precision cables and connectors with proven reliability in extremely harsh environments and all kinds of weather conditions, MegaPhase consistently deliverseven under diffi cult compressed schedules." MegaPhase Chief Executive Offi cer (CEO), William Pote, responds that "Our sense of urgency comes from knowing our cables are saving lives." MegaPhase's interconnect technologies include coaxial cables that have been used to test smart phones, transmit signals on the US Navy's new AWACS E-2D Advanced Hawkeye, Agilent's new FireFox handheld analyzers, and many other high-profi le projects.

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Aug. 16, 2024
Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Aug. 16, 2024
Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Aug. 16, 2024
Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024
Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...