TCXO Ranges 5 To 100 MHz

April 30, 2009
Model TX-600 is a temperature-controlled crystal oscillator (TCXO) from Vectron International available with frequencies from 5 to 100 MHz. The RoHS-compliant, surface-mount oscillator features low phase noise and time-domain jitter at temperatures from ...

Model TX-600 is a temperature-controlled crystal oscillator (TCXO) from Vectron International available with frequencies from 5 to 100 MHz. The RoHS-compliant, surface-mount oscillator features low phase noise and time-domain jitter at temperatures from -40 to +85C with frequency stability of +/-2 PPM. The initial frequency tolerance is +/-1 PPM while the aging rate over one year is also +/-1 PPM. The phase noise is -90 dBc/Hz offset 10 Hz from a 20-MHz carrier, -120 dBc/Hz offset 100 Hz from the same carrier, -145 dBc/Hz offset 10 kHz from the same carrier, and -150 dBc/Hz offset 100 kHz from the same carrier. The maximum jitter is 1 ps. The oscillator is designed for maximum supply voltage of +6 VDC. It is supplied in a 7-x-9-mm surface-mount package.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.