Vector Network Analyzers Arm Themselves for New Challenges (.PDF Download)

June 2, 2016

Fifth-generation (5G) networks are expected to require wider bandwidths and higher frequencies. As a result, characterizing power amplifiers (PAs) and other components will become even more complicated. To measure these devices, a wide-bandwidth vector network analyzer (VNA) measurement approach can be utilized. In the white paper, “Millimeter-wave VNA characterization using modulated signals,” Anritsu discusses how a VNA-based measurement platform can benefit higher-frequency PA measurements for 5G and related applications...

Register or Sign in below to download the full article in .PDF format, including high-resolution graphics and schematics when applicable.

Sponsored Recommendations

Frequency Modulation Fundamentals

The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...