Power Divider/Combiner Channels 0.95 To 2.15 GHz

Sept. 3, 2009
Model ZAPD-2DC+ is a broadband power divider/combiner from Mini-Circuits designed for use from 950 to 2150 MHz. Available with SMA, Type N, or BNC connectors, the component features low typical insertion loss of 0.25 dB. It offers typical isolation of 25 ...

Model ZAPD-2DC+ is a broadband power divider/combiner from Mini-Circuits designed for use from 950 to 2150 MHz. Available with SMA, Type N, or BNC connectors, the component features low typical insertion loss of 0.25 dB. It offers typical isolation of 25 dB between ports and handles RF input power levels to 10 W. The typical VSWR is 1.1:1. The power divider/combiner achieves typical amplitude unbalance between ports of 0.1 dB and typical phase unbalance of 2 deg. The component handles DC pass through current to 500 mA at voltages to 25 V.

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...