L-Band Isolator Handles 150 W CW

Dec. 29, 2010
Model FMP145 is a space-qualified L-band isolator from TRAK Microwave capable of handling150 W CW power and 400 W peak power from 1.355 to 1.405 GHz. The insertion loss is typically less than 0.35 dB across the full operating temperature range from -35 ...

Model FMP145 is a space-qualified L-band isolator from TRAK Microwave capable of handling150 W CW power and 400 W peak power from 1.355 to 1.405 GHz. The insertion loss is typically less than 0.35 dB across the full operating temperature range from -35 to +70C. The isolation is 20 dB and the VSWR is 1.250:1. The isolator is screened to MIL-PRF-39012 with a high-power termination screened to MIL-PRF-55342. The L-band isolator measures 2.25 x 2.50 x 0.750 in. with TNC connectors.

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...