UWB Must Survive The Format Wars

Aug. 1, 2003
Wireless technologies tend to spring up quickly, but often do not take root until the adoption of a standard. For one thing, integrated-circuit (IC) suppliers are reluctant to commit to a proposed technology if there is some uncertainty about how long ...

Wireless technologies tend to spring up quickly, but often do not take root until the adoption of a standard. For one thing, integrated-circuit (IC) suppliers are reluctant to commit to a proposed technology if there is some uncertainty about how long that technology will be in use. Through the acceptance of a standard, the industry is (for the most part) acknowledging that one method is superior than alternative approaches and will thereby support that method in their own products.

Ultrawideband (UWB) technology holds the promise of high data rates for short-range, low-power communications. Some companies have promoted (hyped?) UWB as THE wireless multimedia technology of the future, pointing to its generous data rates as ideal for short-range video transmissions. But as with any wireless communications technology, there is a "rite of passage" for UWB before it can be accepted by an industry of chip and instrument makers, just as there had been for wireless local-area networks (WLANs) before it.

Some engineers currently involved with UWB painfully remember the issues leading to the eventually establishment of WLAN standards. Long debates within IEEE task group meetings on the merits of frequency-hopping spread spectrum (FHSS) versus direct-sequence spread spectrum (DSSS) begrudgingly led to compromises and the final acceptance of the first WLAN standard at 2.4 GHz, IEEE 802.11b. One of the driving considerations for that standard was the FCC's requirement that any WLAN solution must favor coexistence with established ISM-band applications over bandwidth efficiency.

Since there were compromises on the available data rate, and the FCC eventually relaxed its requirements on coexistence, later WLAN standards (802.11a and g, for example) pursued improved bandwidth efficiency. But the initial debates delayed WLAN technology, and cost manufacturers market time. Without a relatively fast resolution to the UWB debates, the same fate could await this novel technology.

The many original proposals for UWB technology (see p. 33) as a wireless personal-area network (WPAN) have apparently come down to two groups: the XtremeSpectrum/Motorola "wideband" version and the Multiband OFDM Alliance (MBOA) "narrowband" version (backed by Intel, Texas Instruments, and others). Both provide huge amounts of data with very little power, albeit with different modulation approaches. If one is a standard, the other is not. But with a standard at hand, chip suppliers, software developers, test-equipment makers, and others involved in the commercialization of UWB technology can move forward and help UWB bypass the market-slowing indecision that haunted the early days of WLANs.

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Aug. 16, 2024
Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Aug. 16, 2024
Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Aug. 16, 2024
Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024
Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...