Tower-Mounted Amplifiers Boast 12-dB Gain

Jan. 16, 2007
The Advanced Wireless Services (AWS) band offers many opportunities for broadband wireless data applications. To provide fast time-to-market in the deployment of such services, a new series of tower-mounted amplifiers (TMAs) has been spawned. The ...

The Advanced Wireless Services (AWS) band offers many opportunities for broadband wireless data applications. To provide fast time-to-market in the deployment of such services, a new series of tower-mounted amplifiers (TMAs) has been spawned. The dual-duplex TMAs each provide a nominal gain of 12 dB. They are offered in two distinct models: a dual AWS-band (1750 MHz/1750 MHz) variant and a dual-band AWSband/PCS-band (1750 MHz/1900 MHz) variant. The TMAs are fully compliant with version 2.0 of the Antenna Interface Standards Group (AISG) antenna control interface standard. Because of the units' low noise figures at both mid-band and band-edge, the TMAs contribute to very low antenna loss. Mid-band and band-edge noise figures for each of the amplifiers are 1.3 dB and 1.5 dB, respectively, in the AWS band. In the PCS band, those noise figures are 1.4 and 1.7 dB, respectively. The dual-duplex AWS-band TMAs, which are designed for both pole and wall mounting, are housed in a compact IP66-protected enclosure.

Radio Frequency Systems, 200 Pondview Dr., Meriden, CT 06450-7195; (203) 6303311, FAX: (203) 634-2272, Internet: www.rfsworld.com

See Associated Figure

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.