ADAS Adds Safety, Raises Auto-Repair Costs

ADAS Adds Safety, Raises Auto-Repair Costs

Jan. 9, 2019
AAA research warns that ADAS systems, which may result in safer highways, could lead to higher automobile repair bills.

Though advanced driver-assistance system (ADAS) technology is certain to reduce automotive accidents and make for safer roads, there may be a price to pay. According to research released recently by the American Automobile Association (AAA), vehicles equipped with ADAS-based safety features can cost considerably more to repair following a collision than their non-ADAS counterparts. The main reason? Expensive sensors and their calibration requirements for such functions as automatic emergency braking, adaptive cruise control, and lane departure warning systems. The AAA discovered that the repair bill for an ADAS-equipped car involved in a minor front- or rear-end collision could end up as high as $5,300, while the same repairs for a car without the ADAS technology might cost closer to $2,200.

Not every automotive mechanic station is equipped to handle repairs on ADAS-based systems—it’s typically the realm of new-car dealers. However, some automobile dealers have not kept pace with the repair and maintenance requirements for the various radar and ultrasonic systems used for increased safety in advanced automotive vehicles.

The AAA’s research warns that, although ADAS technology will ultimately mean safer roads and highways, and likely lower insurance costs for ADAS-equipped vehicles, the repair costs for such vehicles will be greater than the overall monetary savings gained from preventing accidents. Much of the ADAS equipment simply does not work effectively at slower speeds and will not prevent low-speed collisions. That could result in higher automotive insurance rates for drivers of both ADAS-equipped and non-ADAS-equipped vehicles, possibly for as long as the next decade of ADAS technology.

See “Auto Safety Features Raise Repair Costs,” IEEE Spectrum, North America, December 2018, pp. 12-13.

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

Sponsored Recommendations

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024
Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...

Turnkey 1 kW Energy Source & HPA

July 12, 2024
Mini-Circuits’ RFS-2G42G51K0+ is a versatile, new generation amplifier with an integrated signal source, usable in a wide range of industrial, scientific, and medical applications...

SMT Passives to 250W

July 12, 2024
Mini-Circuits’ surface-mount stripline couplers and 90° hybrids cover an operational frequency range of DC to 14.5 GHz. Coupler models feature greater than 2 decades of bandwidth...

Transformers in High-Power SiC FET Applications

June 28, 2024
Discover SiC FETs and the Role of Transformers in High-Voltage Applications