I Qgig 5 Gb Front

Collaboration to Improve 5G mmWave Cellular Coverage

Feb. 28, 2022
The mmWave non-signaling test solution is presented as the first of its kind to support all 5G FR2 frequencies within the 23-45GHz frequency range.

LitePoint announced a technology development partnership with Sivers for its 5G mmWave Antenna-in-Package (AiP) products. The fully integrated IQgig-5G is a versatile multiband mmWave non-signaling test solution presented as the first of its kind to support all 5G FR2 frequencies within the 23-45GHz frequency range. All signal generation, analysis, processing, and RF front-end switching are self-contained inside a single chassis. The test system enables small cell waveform generation and analysis for 5G radio technologies and allows for real-time RF parametric analysis for small cell products.

Sivers’s ECLIPSE3741 is a highly integrated 5G beamformer phased array Antenna in Package (AiP) module. It combines multiple Sivers RFSOI beamforming front end integrated circuits with a 16 element (4x4) antenna array. Covering FR2 band, n260 from 37.0 to 41.0 GHz, it offers exceptionally high linear output power, efficiency, and extreme integration. This AiP module is designed to enable λ/2 wavelength antenna lattice spacing when tiled together to support higher power applications. It has also been extensively optimized for heat management.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...