The network is capable of supporting a variety of railway applications and is customizable to the operatorrsquos frequency resources Image courtesy of Huawei

eLTE-Based Railway Solution Covers 400 MHz to 5.8 GHz

Jan. 3, 2014
By remodeling an enterprise Long Term Evolution (eLTE) solution for use in rail transportation, more reliable transmission channels can be achieved with up to 100 Mb/s throughput.

Metro systems continually face a variety of communications problems including disconnected networks between train and ground systems, interference, and intermittent service. A new solution based on enterprise Long Term Evolution (eLTE) aims to provide more reliable, bilateral radio-transmission channels for train-to-ground voice, data, and video transmissions. In doing so, it should boost overall communication and operational efficiency for rail transportation.

Developed by Huawei and currently deployed in China for Zhengzhou Metro, the eLTE urban rail-transportation solution features a variety of anti-interference technologies. Offering throughput to 100 Mb/s with low-latency transmission, it can be customized to the operator’s frequency resources from 400 MHz to 5.8 GHz. In difficult coverage environments, such as deserts, tunnels, and bridges, both traditional macro and advance distributed base transceiver stations (BTSs) can be employed for continuous coverage. The professional broadband trunking system supports simultaneous voice and video dispatching for greater efficiency. Passengers also will benefit from travel and entertainment information, such as route guidance, weather forecasts, and WiFi.

In August 2013, Huawei deployed the first commercial application of a 3.6 ~ 3.8-GHz eLTE system in Poland to provide more efficient government communications. Reportedly, the fourth-generation (4G) wireless system provides carrier-grade resilience with features that can be set up and maintained more easily than traditional solutions. Providing coverage over a range of 100 km even in demanding areas, the network uses 20 MHz of bandwidth and 2x2 multiple input multiple output (MIMO) technology to support downlink data rates to 100 Mb/s and uplink data rates to 50 Mb/s.

For the eLTE-based rail solution, applications targeting metro operators include closed-circuit television, passenger information systems (PISs), communication-based control (CBTC), vehicle-mounted video surveillance, and broadband trunking. Techniques like automatic frequency control (AFC) are employed to deal with the Doppler effect and increase successful handover rates. In 2010, the solution was demonstrated on the Shanghai Maglev Train. At that time, it provided 50-Mb/s broadband services on trains traveling 430 km/h.

About the Author

Iliza Sokol | Associate Digital Editor

Iliza joined the Penton Media group in 2013 after graduating from the Fashion Institute of Technology with a BS in Advertising and Marketing Communications. Prior to joining the staff, she worked at NYLON Magazine and a ghostwriting firm based in New York.

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Aug. 16, 2024
Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Aug. 16, 2024
Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Aug. 16, 2024
Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024
Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...