National Adds To Amplifier Line

Sept. 27, 2007
National Semiconductor has augmented its line of energy-efficient high-speed differential amplifiers with the LMH6552, LMH6515, and LMH6555 members of the company's PowerWise(R) family of products. The LMH6552 is a current-feedback amplifier with ...

National Semiconductor has augmented its line of energy-efficient high-speed differential amplifiers with the LMH6552, LMH6515, and LMH6555 members of the company's PowerWise(R) family of products. The LMH6552 is a current-feedback amplifier with 1.5-GHz bandwidth and 0.1-dB gain flatness to 450 MHz. Harmonic distortion is only -74 dBc at 70 MHz making it ideal for boosting signals to 14-b ADCs at 70 MHz. Model LMH6515 is a digitally controlled variable gain amplifier (DVGA) with maximum gain of 26 dB and 31-dB gain adjustment range over a 3-dB bandwidth of 600 MHz. It allows gain to be adjusted in 1-db steps and provides a noise figure of 8 dB and output third-order intercept point of +40 dBm. Model LMH6555 is a differential driver optimized for DC-coupled, 8-b data-acquisition applications through 750 MHz. It features 53-dB spurious-free dynamic range (SFDR) at 750 MHz converting single-ended signals into differential outputs with 0.5-dB gain flatness through 330 MHz. For more information on these energy-efficiency amplifiers, visit the National Semiconductors website.

National Semiconductor (www.national.com)

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...