Mwrf 1506 Pasternack 0

Attenuators Pad 3 GHz at 75 Ω

July 25, 2014
A line of 75-Ω step attenuators is well suited for video and broadcast duties.

A line of F-type 75-Ω fixed  attenuators has been introduced for 75-Ω applications from DC to 3 GHz. Available in attenuation values from 1 to 10 dB in 1-dB steps, as well as 16 and 20 dB, these attenuators are well suited for signal-leveling chores in video, broadcast, and satellite communications (satcom) systems. They can handle power levels to 2 W with gold-plated center contacts for low loss. They meet IEC 60169-24 standards and are compatible all other standard F-type components.

Pasternack Enterprises, Inc., 17802 Fitch, Irvine, CA 92614; (949) 261-1920

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...