Mwrf 1482 Fairviewpromo 0

Tunable Filters Screen 0.1 to 3.0 GHz

July 10, 2014
Lines of mechanically tuned bandpass and band-reject filters are designed for applications to 3 GHz.

Lines of tunable band-stop and bandpass filters have been developed for test and other applications from 100 MHz to 3 GHz. A total of six bandpass filters offer octave-band tuning from 125 MHz to 3 GHz and 5% pass bands. These five-section mechanical designs achieve mechanical dial accuracy within 1%. Five new band-reject filters range from 100 MHz to 2 GHz with 1% rejection bandwidths.

These three-section designs boast mechanical dial tuner accuracy to 0.5%. These durable, silver-plated filters, which are capable of more than 50-dB attenuation, are supplied with Type-N connectors. Each is rated for 50 W CW RF/microwave power.

Fairview Microwave, Inc., 1130 Junction Dr., Ste. 100, Allen, TX 75013; (800) 715-4396, (972) 649-6678, FAX: (972) 649-6689 

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...