Resistive Couplers Span DC To 15 GHz

Jan. 28, 2010
The IMK series of resistive couplers from International Manufacturing Services, Inc. (IMS) is available for applications from DC to 15 GHz. The resistive couplers can be specified with values of 6 to 30 dB with less than 1 dB insertion loss for coupling ...

The IMK series of resistive couplers from International Manufacturing Services, Inc. (IMS) is available for applications from DC to 15 GHz. The resistive couplers can be specified with values of 6 to 30 dB with less than 1 dB insertion loss for coupling values greater than 18 dB. The VSWR is typically 1.2:1 while the typical power-handling capability is 1 W. Fabricated with thick film on alumina substrates, the couplers measure 0.120 x 0.120 x 0.035 in. or less. Samples of the IMK series resistive coupler are available by visiting the company's web site.

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Aug. 16, 2024
Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Aug. 16, 2024
Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Aug. 16, 2024
Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024
Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...