Switch Controls 0.1 To 2.7 GHz

July 11, 2012

Model SKY13388-465LF is a symmetrical, single-pole, four-throw (SP4T) switch designed for applications from 100 MHz to 2.7 GHz. Built with a silicon-on-insulator (SOI) process, the switch requires only two control lines for operation. The high-performance SP4T switch features typical isolation of better than 30 dB at 1.0 GHz and more than 23 dB at 2.7 GHz. The insertion loss is typically 0.60 dB at 2.2 GHz and 0.65 dB at 2.7 GHz. The switch, which runs on supplies of +2.5 to +5.5 VDC, is rated for +37 dBm maximum input power. It exhibits an input 1-dB compression point of typically +36 dBm from 0.8 to 2.7 GHz, and an input third-order intercept point of typically +65 dBm. The switch is supplied in a compact quad flat no lead (QFN) housing measuring just 2 x 2 mm.

Skyworks Solutions, Inc., 20 Sylvan Rd., Woburn, MA 01801; (781) 376-3000, FAX: (781) 376-3100, e-mail: [email protected], www.skyworksinc.com.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.