Miniature Lowpass Filters Serve Communications To 5.5 GHz

Sept. 21, 2010
A series of lowpass filters (LPFs) is suitable for reducing harmonic signals in communications systems through 5.5 GHz. Designated the LP0402N series, the rugged thin-film filters are available in miniature 0402 case sizes with LGA termination from ...

A series of lowpass filters (LPFs) is suitable for reducing harmonic signals in communications systems through 5.5 GHz. Designated the LP0402N series, the rugged thin-film filters are available in miniature 0402 case sizes with LGA termination from 787 MHz to 5.5 GHz. Thanks to thin-film technology, the filters boast superior performance at frequencies suitable for WiMAX, WiBro, and WLAN applications. From 3400 to 3600 MHz, for example, the LP0402N3500ANTR exhibits typical insertion loss of 0.3 dB with 19 dB return loss. It provides attenuation of 30 dB at two times the cutoff frequency (2F0) and 20 dB at three times the cutoff frequency (3F0). Its sibling, the LP0402N5200ANTR, typically exhibits 0.2 dB insertion loss and 19 dB return loss from 5050 to 5350 MHz. This LPF provides the same attenuation levels as the LP0402N3500ANTR. P&A: starting at $0.16 each, 10,000 qty.; stock to six weeks.

AVX Corp., 801 17th Ave. South, Myrtle Beach, SC 29578; (843) 448-9411, FAX: (843) 444-2864, Internet: www.avx.com.

See associated figure

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...