Novel Contacts Aid Lead-Free Packaging

Dec. 28, 2004
This simple yet elegant solution to achieving good electrical and ground connections in miniature high-frequency components clears the way for lead-free package processing.

Electronics manufacturing is steadily moving toward the use of lead-free packaging and lead-free printed-circuit-board (PCB) attachments. The European Union (EU) has already established Directive 2002/95/EC on the restriction of certain hazardous substances, such as cadmium, lead, and mercury, in electrical and electronic equipment. As many suppliers from the United States have recently learned, to sell in Europe, components must be suitable for lead-free electronics. In response to that need, Synergy Microwave (Paterson, NJ) has developed a simple but effective contact for its component packages that supports the use of lead-free solders and solder pastes. The company's REL-PRO® contacts and solder pads support high-integrity electrical and ground connections even when using reflow processes at lower-than-standard temperatures.

The REL-PRO® solder pads, for which a patent has been applied, feature precisely drilled via inspection holes that provide for visual inspection of solder joints. Mechanically formed with 50-mil drill bits, these via inspection holes are drilled through the package solder pads, in effect providing a window through which the integrity of reflow-solder connections can be quickly checked.

One of the difficulties in adopting current lead-free package solutions has been the high reflow temperatures needed to ensure good integrity in the solder connections. In comparison to the solder reflow temperatures typically used for tin/lead (Sn/Pb) solder connections (+260°C), the REL-PRO packages can be assembled using +235°C lead-free solder, as well manual or automatic placement and attachment with lead-free solder pastes at +217°C.

The company plans to offer these "lead-free-ready" packages with its wide assortment of active and passive components, including attenuators, couplers, demodulators, frequency synthesizers, mixers, modulators, phase detectors, power dividers, transformers, and voltage-controlled oscillators (VCOs). According to the company's president, Meta Rohde, "We are prepared to go totally lead free with all of our components." These modified packages can be tested in existing test fixtures, with the solder via holes greatly simplifying visual inspection of assembled parts.

Of course, the move to lead-free packaging requires customer readiness to adopt a lead-free assembly process. To assist in the progression, Synergy is planning to post outline drawings of all new REL-PRO-packaged components on its website. Synergy Microwave Corp., 201 McLean Blvd., Paterson, NJ 07504; (973) 881-8800, FAX: (973) 881-8361, e-mail: [email protected], Internet:

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.