Incorrect Figure

Nov. 12, 2007
FIGURE 2 in "Wireless Laboratory Aids Students And Research" by Hseyin Arslan (October 2007, p. 59) was incorrect. The figure has been corrected for the online version. The corrected figure can be found on the Microwaves & RF website at ...

FIGURE 2 in "Wireless Laboratory Aids Students And Research" by Hseyin Arslan (October 2007, p. 59) was incorrect. The figure has been corrected for the online version. The corrected figure can be found on the Microwaves & RF website at http://mwrf.com//files/ 30/17222/Figure_02.jpg. We apologize the author and to our readers for the error.

The Editors of Microwaves & RF

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...