Broadband Resistive Coupler Covers DC To 15 GHz

March 30, 2010
The IMK resistive-coupler series covers DC to 15 GHz. Thanks to their thick-film-on-alumina construction, the couplers promise insertion-loss performance comparable to frequency-sensitive couplers. A 0.120-x-0.120-in. device, for example, exhibits ...

The IMK resistive-coupler series covers DC to 15 GHz. Thanks to their thick-film-on-alumina construction, the couplers promise insertion-loss performance comparable to frequency-sensitive couplers. A 0.120-x-0.120-in. device, for example, exhibits insertion loss of 1 dB or less. It is available with a coupling range from 6 to 30 dB and is rated at 1 W input power. The coupler operates from -55 to +150C. It exhibits VSWR of 1.20:1, depending on implementation. Attachment is accomplished with either solder or epoxy.

International Manufacturing Services, Inc., 50 Schoolhouse Ln., Portsmouth, RI 02871; (401) 683-9700, FAX: (401) 683-5571, e-mail: [email protected], Internet: www.ims-resistors.com.

See Associated Figure

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...