Implementing a Flexible Testbed for 5G Waveform Generation and Analysis
Nov. 15, 2016
Sponsored by Keysight Technologies
Be prepared as you explore early concepts and potential 5G waveforms that use a variety of modulation schemes, sub-carrier spacing, at many different frequencies and modulation bandwidths with the Keysight 5G testbed solution. New technologies such as multi-carrier waveforms, millimeter-wave frequencies and wider modulation bandwidths are in need of what 5G can offer. Learn about the 5G testbed flexibility for simulation, generation and analysis of 5G signals by reading this white paper.
Explore cascaded amplifiers, revealing how a single driver can dominate performance in a four-parallel setup and how optimized input power can reduce AM-to-PM distortion for maximum...
See how an X-band SSB upconverter built with Mini-Circuits components uses IQ mixing to suppress unwanted sidebands and boost spectral efficiency for applications from 5G to radar...
Mini-Circuits VP of Engineering Joe Merenda explains additive phase noise (APN) in RF amplifiers, covering theory, measurement, specifications, and small vs. large signal behavior...
The new M4SWA4-34DR+ SP4T MMIC switch delivers fast, wideband signal routing from DC to 30 GHz, with superior power handling, quick switching, and cost advantages over SOI devices...
