Testing of Wireless Designs to Ensure Compliance

Sept. 16, 2016

Sponsored by Keysight Technologies

Mwrf Com Sites Mwrf com Files Uploads 2016 09 16 2016 Solution Guide Graphic 150x126

The test process for complete wireless systems, subsystems, and components is very complex. Ensuring successful testing from design optimization, troubleshooting, and validation through wireless standards compliance, in a way that is time- and cost-efficient, requires a comprehensive test approach. Download this application article plus 3 others in the latest edition of the Keysight Application Solution Guide.

DOWNLOAD NOW

Continue Reading

Reducing Time-Delay Interference in Mission-Critical Situations

Microwaves & RF TechXchanges

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Aug. 16, 2024

Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Aug. 16, 2024

Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Aug. 16, 2024

Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

July 12, 2024

Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...