Noise Com Announces Two Noise Modules

July 26, 2007
Wireless Telecom Group has added two new noise modules to the Noise Com lines of products, the models NC1127A and NC1128A. The former operates from 10 MHz to 5 GHz while the latter works from 10 MHz to 10 GHz. Both modules feature white Gaussian ...

Wireless Telecom Group has added two new noise modules to the Noise Com lines of products, the models NC1127A and NC1128A. The former operates from 10 MHz to 5 GHz while the latter works from 10 MHz to 10 GHz. Both modules feature white Gaussian noise with high output power and excellent flatness across the operating frequency ranges. The NC1127A provides -30 dBm output power at -117 dBm/Hz with typical flatness across the frequency range of 2.5 dB. Model NC1128A provides -17 dBm output power at -117 dBm/Hz with typical flatness of 2.5 dB.

Wireless Telecom Group, Noise Com (www.noisecom.com)

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...