PNA VNAs Add Embedded LO Capability

Sept. 18, 2007
Agilent Technologies has announced the availability of an embedded local oscillator (LO) measurement capability for its PNA Series of vector network analyzers (VNAs). This arms the VNAs with the ability to test frequency converters and mixers without ...

Agilent Technologies has announced the availability of an embedded local oscillator (LO) measurement capability for its PNA Series of vector network analyzers (VNAs). This arms the VNAs with the ability to test frequency converters and mixers without having to directly access a common reference signal. Results for the embedded LO measurement capability essentially match those from phase locking two independent LO sources. On measurements performed on a Ka-band satellite communications frequency converter, for example, delay accuracy as small as 125 ps has been measured. For more information on the embedded LO measurement capability, visit the Agilent Technologies website at: http://www.agilent.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.