Mwrf 10613 Rlcelectronicspromo

Cavity Filter Passes Signals to 26 GHz

April 12, 2019
A cavity bandpass filter developed by RLC Electronics is available with center frequency passbands to 26 GHz.

Model CBPF is a cavity bandpass filter that can be supplied with a center frequency over a total range of 0.5 to 26.0 GHz. It’s available with a 3-dB bandwidth from 0.2 to 3.0% of the center frequency and with 2 to 14 sections, depending on out-of-band rejection. In-band loss is typically 0.6 dB or less across the full 3-dB bandwidth. The 50-Ω bandpass filter meets MIL-E-5400, Class 1A requirements. It comes with a variety of coaxial connectors, depending on frequency, including BNC, Type N, TNC, and SMA connectors.

RLC Electronics, 83 Radio Circle, Mt. Kisco, NY 10549; (914) 241-1334, FAX: (914) 241-1753, e-mail: [email protected].

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...