Meca Announces Low-Loss Divider/Combiners

Dec. 8, 2006
Meca Electronics has developed a line of rugged "tee" configuration RF two-and three-way power divider/combiners that are well suited for in-building wireless applications. Models cover the frequency range from 800 MHz to 6 GHz, and all units are rated ...

Meca Electronics has developed a line of rugged "tee" configuration RF two-and three-way power divider/combiners that are well suited for in-building wireless applications. Models cover the frequency range from 800 MHz to 6 GHz, and all units are rated for maximum input power levels of 20 W. For example, model P3S-1.900V is a three-way power combiner with stainless-steel SMA female connectors that is designed for signals from 800 MHz to 3 GHz. It exhibits typical isolation of 22 dB between ports and typical insertion loss of 0.6 dB (maximum of 0.8 dB) across the full frequency range. Maximum amplitude imbalance is an impressive 0.4 dB while maximum phase imbalance is 6 deg. The typical input and output VSWRs are 1.25:1 and 1.20:1, respectively. Weatherproof versions of all models are also available. For more information on any of these two- and three-way power divider/combiners, visit the Meca Electronics website at: http://www.e-meca.com/

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

Sponsored Recommendations

Wideband MMIC LNA with Bypass

June 6, 2024
Mini-Circuits’ TSY-83LN+ wideband, MMIC LNA incorporates a bypass mode feature to extend system dynamic range. This model operates from 0.4 to 8 GHz and achieves an industry leading...

Expanded Thin-Film Filter Selection

June 6, 2024
Mini-Circuits has expanded our line of thin-film filter topologies to address a wider variety of applications and requirements. Low pass and band pass architectures are available...

Mini-Circuits CEO Jin Bains Presents: The RF Engine of the 21st Century

June 6, 2024
In case you missed Jin Bains' inspiring keynote talk at the inaugural IEEE MTT-S World Microwave Congress last week, be sure to check out the session recording, now available ...

Selecting VCOs for Clock Timing Circuits A System Perspective

May 9, 2024
Clock Timing, Phase Noise and Bit Error Rate (BER) Timing is critical in digital systems, especially in electronic systems that feature high-speed data converters and high-resolution...