IPP Produces High-Power Combiners

April 1, 2007
Innovative Power Products has launched a line of in-phase power combiners with a variety of split ratios, frequencies, and power levels. For example, model IPP-1000 is a four-way combiner that handles total power levels fo 750 W CW from 400 to 1000 MHz. ...

Innovative Power Products has launched a line of in-phase power combiners with a variety of split ratios, frequencies, and power levels. For example, model IPP-1000 is a four-way combiner that handles total power levels fo 750 W CW from 400 to 1000 MHz. Insertion loss is less than 0.4 dB across that frequency range, with maximum VSWR of 1.30:1 or less. The Isolation between ports is better than 16 dB. Amplitude imbalance is 0.2 dB or better while phase imbalance is 5 deg. or better. For more information, contact Inovative Power Products at their website: http://www.innovativepp.com/

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...