Flann Fabricates Orthomode Transducers

July 31, 2007
Flann Microwave is offering a line of orthomode transducers for applications through 140 GHz. Designed for use with dual-polarized antennas, these waveguide components are available in broadband and narrowband versions. For example, model 22780 provides ...

Flann Microwave is offering a line of orthomode transducers for applications through 140 GHz. Designed for use with dual-polarized antennas, these waveguide components are available in broadband and narrowband versions. For example, model 22780 provides an in-line port with frequency range of 27.5 to 29.5 GHz and orthomode port with range of 27.5 to 29.5 GHz. The isolation between ports is 45 dB while the return loss is 23 dB. The insertion loss is controlled to a mere 0.2 dB. For more information, visit the Flann Microwave website at: www.flann.com

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.