Narda Introduces LNA Modules To 18 GHz

Sept. 21, 2007
Narda Microwave-East has introduced a comprehensive line of low-noise-amplifier (LNA) modules with frequency coverage to 18 GHz and noise figures as low as 1.8 dB. The LNA modules are suitable for a wide range of applications, including broadband ...

Narda Microwave-East has introduced a comprehensive line of low-noise-amplifier (LNA) modules with frequency coverage to 18 GHz and noise figures as low as 1.8 dB. The LNA modules are suitable for a wide range of applications, including broadband test equipment and aerospace and defense systems. They meet MIL-STD-883 requirements. As an example of the new LNA module line, model NEL-0618T620-5MH provides at least +20 dBm output power at 1-dB compression from 6 to 18 GHz with at least 28 dB gain and noise figure of 4 dB. The temperature-compensated LNA module operates from a single +12-VDC supply and draws less than 150 mA current.

Narda Microwave-East (www.nardamicrowave.com/east)

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.