Wideband Power Dividers Offer 18 dB Isolation

July 23, 2009
With growth forecasted in the wireless-broadband market and WiMAX in particular, many firms are targeting this area for product development. An example is a series of WiMAX power dividers covering 0.8 to 6.0 GHz. The wideband power ...

With growth forecasted in the wireless-broadband market and WiMAX in particular, many firms are targeting this area for product development. An example is a series of WiMAX power dividers covering 0.8 to 6.0 GHz. The wideband power dividers feature 18 dB of isolation and SMA connectors on all ports. These Wilkinson designs use single or multistage layouts including two-way, four-way, and six-way configurations. Wilkinson power dividers are used in applications that require the RF signal's distribution, such as antenna sharing, test and verification laboratory environments, and in-building installations. P&A: stock.

Trilithic, Inc., 9710 Park Davis Dr., Indianapolis, IN 46235; (317) 895-3600, FAX: (317) 895-3613, Internet: www.trilithic.com.

See associated figure

About the Author

Nancy Friedrich | RF Product Marketing Manager for Aerospace Defense, Keysight Technologies

Nancy Friedrich is RF Product Marketing Manager for Aerospace Defense at Keysight Technologies. Nancy Friedrich started a career in engineering media about two decades ago with a stint editing copy and writing news for Electronic Design. A few years later, she began writing full time as technology editor at Wireless Systems Design. In 2005, Nancy was named editor-in-chief of Microwaves & RF, a position she held (along with other positions as group content head) until 2018. Nancy then moved to a position at UBM, where she was editor-in-chief of Design News and content director for tradeshows including DesignCon, ESC, and the Smart Manufacturing shows.

Sponsored Recommendations