Compact PLL/Synthesizer Runs At 4240 MHz

Nov. 17, 2009
Essentially, a new phase-locked loop (PLL)/synthesizer combines a voltagecontrolled oscillator (VCO) and a PLL in a package that is only slightly larger than a VCO alone. Dubbed the CPLL58- 4240-4240, this PLL/ synthesizer typically ...

Essentially, a new phase-locked loop (PLL)/synthesizer combines a voltagecontrolled oscillator (VCO) and a PLL in a package that is only slightly larger than a VCO alone. Dubbed the CPLL58- 4240-4240, this PLL/ synthesizer typically offers phase noise of -95 dBc/Hz at 10 kHz offset from the carrier while delivering at least +3 dBm output power. The VCO draws 5 VDC while the PLL requires 3 VDC. The PLL/synthesizer usually provides second harmonic suppression of -15 dBc. It operates at 4240 MHz with typical tuning steps of 2500 kHz. The CPLL58-4240-4240 only requires external frequency reference and supply voltages for the internal PLL and VCO. It is programmed using a standard threeline interface (data, clock, and load enable). The CPLL58-4240-4240 targets telecommunications, computers, radio equipment, base stations, and other electronic applications. It is housed in a 0.582-x-0.8- x-0.15-in. SMD package.

Crystek Corp., 12730 Commonwealth Dr., Ft. Myers, FL 33913; (239) 561-3311, FAX: (239) 561-1025, Internet: www.crystek.com.

See Associated Figure

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.