Wireless Medical Devices Eye Three Core Standards

June 13, 2008
RECENTLY, INTEREST HAS GROWN in the potential of wireless technologies to enable a new generation of mobile personal-healthcare devices. These efforts are summarized in a white paper by EZURiO titled, "Wireless Connectivity the Key to Enabling ...

RECENTLY, INTEREST HAS GROWN in the potential of wireless technologies to enable a new generation of mobile personal-healthcare devices. These efforts are summarized in a white paper by EZURiO titled, "Wireless Connectivity the Key to Enabling Personal Medical Technology." The seven-page document explains that three wireless standards Bluetooth, Wibree, and WiFiwill most likely dominate the majority of medical applications.

Four primary parameters dictate the requirements of short-range technology for the majority of medical-use cases: the range over which the device needs to operate, the amount of data that needs to be transferred, the frequency of those transfers, and the power that is available. Under the auspices of the IEEE 11073 Personal Health Devices Working Group, the industry is developing standards for the way in which data from such devices is structured. As a result, similar devices from different manufacturers should be able to send medical data in the same format.

In addition, a working group is cooperating with medical device manufacturers to define a Bluetooth Medical Device Profile that enables products from different manufacturers to interoperate. The first standards also should be spawned by the IEEE 11073 Personal Health Devices Working Group. Together, they will enable the first generation of low-cost, interoperable medical devices.

EZURiO Ltd., Saturn House, Mercury Park, Wycombe Ln., Wooburn Green, Bucks HP10 0HH, UK; +44 (0) 1628 858 940, FAX: +44 (0) 1628 528 382, Internet: www.ezurio.com.

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...