Northrop Grumman Corp.
Denewsmay13 2 Figure

FAA Chooses Companies to Assist on Drone Remote IDs

May 12, 2020
The FAA is working with eight technology companies to develop an efficient and effective means of creating remote identification (remote ID) codes for UAVs.

Unmanned aerial systems (UASs), commonly known as drones, will eventually be part of almost every military battlefield. A greater number of UASs will be involved in many other workplaces, however, for consumer, commercial, and industrial applications, such as helping on farms and in warehouses. To keep the skies safe, however, it must be possible to identify each drone, and such is the responsibility of the U.S. Department of Transportation’s Federal Aviation Administration (FAA). The agency recently announced that it had chosen eight companies to help with establishing requirements for the remote identification (remote ID) codes for UAS aircraft so that they can be readily identified and located while flying in U.S. airspace. The eight companies are Airbus, AirMap, Amazon, Intel, OneSky, Skyward, T-Mobile, and Wing. The companies were selected as part of a request for information process conducted in December 2018. As U.S. Transportation Secretary Elaine L. Chao explains: “The FAA will be able to advance the safe integration of drones into our nation’s airspace from these technology companies’ knowledge and expertise on remote identification.”

The numbers of UAS devices and pilots are growing rapidly in the U.S., with a total of more than 1.5 million drones (including commercial and military) already registered and over 170,000 remote drone pilots registered. In addition, over 1 million drones have been registered for recreational use. The new Remote ID technology is being developed simultaneously with a proposed Remote ID rule which will help to maintain safe operating conditions even as the numbers of drones increase so rapidly. The FAA is building on a UAS traffic management (UTM) system and Low Altitude Authorization and Notification Capability (LAANC) that have contributed to the safe use of many smaller drones for different applications. A decade earlier, the majority of UAS applications were for military use. But within the next 10 years, the number of nonmilitary drone applications is expected to far exceed military drone applications. 

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.