• Resources
  • Directory
  • Webinars
  • White Papers
  • Video
  • Blogs
  • EDGE Awards
  • CAD Models
    1. Markets

    2.5-GHz, 90-Deg. Antenna Serves WiMAX Base Stations

    May 13, 2008
    TO TARGET both fixed and mobile WiMAX applications, a new antenna is promising to provide a very predictable pattern and consistent performance. The antenna specifically targets maximal-ratio-combining (MRC), multiple-input-multiple-output (MIMO), ...

    TO TARGET both fixed and mobile WiMAX applications, a new antenna is promising to provide a very predictable pattern and consistent performance. The antenna specifically targets maximal-ratio-combining (MRC), multiple-input-multiple-output (MIMO), and other wireless wide-areanetwork applications. The 2.5-GHz, dual-slant 45-deg., 90-deg. WiMAX base-station antenna is fully compliant with ETSI EN 301.525 CS pattern specifications. It operates across the 2.3-to-2.7-GHz frequency band. To help to eliminate dead spots below the antenna, it offers a maximum-nullfill (-25-deg.) feature. High gain of 16 dBi vows to extend area coverage.

    Laird Technologies, 3481 Rider Trail South, St. Louis, MO 63045; (636) 898-6000, FAX: (636) 898- 6100, Internet: www.lairdtech.com.

    See associated figure

    Continue Reading

    Sponsored Recommendations

    Getting Started with Python for VNA Automation

    April 19, 2024
    The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

    Introduction to Copper Mountain Technologies' Multiport VNA

    April 19, 2024
    Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

    Automating Vector Network Analyzer Measurements

    April 19, 2024
    Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

    Guide to VNA Automation in MATLAB Using the TCP Interface

    April 19, 2024
    In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.