Everything in one place with the microwaves and beyond reference poster
Electronic devices are pushing the frequency spectrum higher, necessitating new coaxial connectors to handle the higher frequencies with waveguides often used at the millimeter end of the spectrum. Our new poster summarizes the many size variations required to cover the bands up to 1.7 THz, including the frequency band designations D-Band and G-Band – potential sub-THz bands for upcoming gigabit communications beyond 5G.
Important RF lookup tables
Signal level conversions
Essential formulas
An estimation table for mismatch and measurement uncertainty
Explore cascaded amplifiers, revealing how a single driver can dominate performance in a four-parallel setup and how optimized input power can reduce AM-to-PM distortion for maximum...
See how an X-band SSB upconverter built with Mini-Circuits components uses IQ mixing to suppress unwanted sidebands and boost spectral efficiency for applications from 5G to radar...
Mini-Circuits VP of Engineering Joe Merenda explains additive phase noise (APN) in RF amplifiers, covering theory, measurement, specifications, and small vs. large signal behavior...
The new M4SWA4-34DR+ SP4T MMIC switch delivers fast, wideband signal routing from DC to 30 GHz, with superior power handling, quick switching, and cost advantages over SOI devices...
