Design Summit Promo

A Deep Dive into the Future of Manufacturing

Nov. 9, 2020
Next week, the Design Summit 2020 virtual event will delve into the key emerging technologies and issues.

After a tumultuous 2020, it goes without saying that manufacturing is facing many questions. To help to bring those issues into focus, Machine Design has joined with other members of Endeavor Business Media’s Design & Engineering Group to convene Design Summit 2020.

This virtual conference and trade event will run from Nov. 16-19, with new sessions each day focused on the key technologies and issues within manufacturing.

Three keynote presentations will highlight the first three days of the event:

  • On Mon., Nov. 16 at 10 a.m. EST, Peter Eelman of AMT and Jeff Bernstein of RIA will discuss how trade associations have adapted to the challenges of serving their members and suppliers in a time of a global pandemic. Entitled “The New Handshake,” this session will focus on how associations have met the educational and business needs of their members, how virtual events have been important to their outreach during the pandemic, and the future of association trade events.
  • On Tues., Nov. 17 at 10 a.m. EST, the Design Summit will kick off a continuing focus on Women in Science and Engineering (WISE) with a panel discussion on the challenges and opportunities for women in industry. The panel will feature Cindy Tomei of the  Illinois Manufacturers’ Association; Audrey A. Sherman, a Division Scientist with 3M’s Medical Solutions Division; and Chandra Brown, CEO with digital innovation  incubator MxD.
  • On Wed., Nov. 18 at 10 a.m. EST, Design Summit 2020 looks at the future workforce in manufacturing. Representatives from NSPE, IEEE and ASME will discuss the opportunities, challenges and outlook for engineering in 2020 and beyond. Speakers include Dr. Oscar Barton, dean and professor at the Clarence M. Mitchell, Jr. School of Engineering at Morgan State University; Tricia Hatley, the 2020-2021 president of the National Society of Professional Engineers (NSPE); and Mario Milicevic, an IEEE Member and communication systems engineer at MaxLinear in Irvine, Calif.

Other Design Summit 2020 sessions will focus on such areas as:

  • Additive manufacturing;
  • Robotics;
  • Electric vehicles;
  • The post-election economic outlook;
  • Post-COVID-19 changes in supply chains;
  • And much, much more.

To register for Design Summit 2020, go to lp.endeavorb2b.com/design-summit.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.