Mwrf 475 Fig01 3 0

LNA Scales To 500 MHz

Dec. 16, 2011
Model AMF-2F-00020050-20-28P is a broadband low-noise amplifier (LNA) capable of more than 35 dB gain from 20 to 500 MHz with maximum noise figure of 2 dB. The gain flatness is 1.75 dB across the full band, and typically 1.0 dB. The ...
Model AMF-2F-00020050-20-28P is a broadband low-noise amplifier (LNA) capable of more than 35 dB gain from 20 to 500 MHz with maximum noise figure of 2 dB. The gain flatness is 1.75 dB across the full band, and typically 1.0 dB. The amplifier delivers +28-dBm output power at 1-dB compression with an output third-order intercept of typically +40 dBm. The LNA draws 500 mA maximum current from a +15-VDC supply. It is supplied in an aluminum alloy housing measuring just 1.22 x 0.88 in. with field-replaceable SMA connectors. It is available in broader-bandwidth models and with hermetic seal as options.

MITEQ, INC.
100 Davids Dr.
Hauppauge, NY 11788
(631) 436-7400
FAX: (631) 436- 7430
www.miteq.com

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...