Mwrf 275 Fig01 1 1

OMTs Operate Over K- and Ka-Bands

June 13, 2012
Models SAT-KB-39642-T1 and SAT-KA-25028-T1 are full-band K-band (18.0 to 26.5 GHz) and Ka-band (26.5 to 40.0 GHz) orthomode transducers (OMT), respectively. These components separate orthogonally polarized signals within the same band, allowing two ...
Models SAT-KB-39642-T1 and SAT-KA-25028-T1 are full-band K-band (18.0 to 26.5 GHz) and Ka-band (26.5 to 40.0 GHz) orthomode transducers (OMT), respectively. These components separate orthogonally polarized signals within the same band, allowing two channels to be used within the band simultaneously. Combined with a polarizer, right-hand circular polarization (RHCP) and left-hand circular polarization (LHCP) can be realized in one assembly. The OMTs exhibit 0.4-dB insertion loss, with 45-dB channel isolation and 35-dB cross polarization across the full waveguide bands. OMTs for use in other frequency bands, from WR-22 through WR-10, are also available.

SAGE Millimeter, Inc.
3043 Kashiwa St.
Torrance, CA 90505
(424) 757-0168
FAX: (424) 757-0188
www.sagemillimeter.com

Sponsored Recommendations

Designing Wireless Modular Robots Using Advanced 3D Printing Precision

March 28, 2024
Learn how researchers at Southern Methodist University used 3D printing to fabricate wireless modular robots.

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Micro 3D Printing Helps Fabricate Microwells for Microgravity

March 28, 2024
Learn how micro 3D printing helped to fabricate miniaturized vessels called hydrowells for culturing 3D cellular spheroids for microgravity.