Content

Cable Assemblies Are Hand Formable

March 14, 2012

Hand-formable coaxial cable assemblies in the CCSMA26.5-MM-086 series are designed for use from DC to 26.5 GHz. The 50-Ω cables exhibit attenuation of 1.40 dB/ft at 26.5 GHz with shielding effectiveness (SE) of greater than 100 dB. Usable over temperatures from -40 to +85C, they have an outside diameter of 0.086 in. and a minimum bend radius of 0.125 in. for a single bend and 0.99 in. for multiple bends. The assemblies are available in standard lengths from 3 to 12 in.

Crystek Corp.
12730 Commonwealth Dr.
Ft. Myers, FL 33913
(800) 237-3061
(239) 561-3311
FAX: (239) 561-1025
e-mail: [email protected]
www.crystek.com

Continue Reading

Reducing Time-Delay Interference in Mission-Critical Situations

Microwaves & RF TechXchanges

Sponsored Recommendations

Forging the Future of Defense

Oct. 11, 2024

Raytheon’s Advanced Technology team incubates capabilities that fuel the future of defense. Together with leading research and development organizations, def...

Phase-Matched Cable Assemblies

Oct. 8, 2024

Phase-matched cable assemblies are ubiquitous, and growing in popularity. Electrical length matching requirements continue to tighten and the mechanical precision of cable construction...

3 New Wideband MMIC LNAs Cover 5.5 to 20 GHz

Oct. 8, 2024

Mini-Circuits’ expanded PMA3-series of wideband, ultra-low NF MMIC amplifiers operates in ranges between 5.5 and 20 GHz.

Wideband Amplifiers Variable and Temperature-Compensated Gain

Oct. 8, 2024

Many types of RF systems and applications that span from the upper end of microwave frequencies to the lower end of mmWave have arisen in recent years. Meeting system requirements...