Hybrid Couplers Channel WiMAX

June 17, 2010
The 7055-3.000 line of WiMAX hybrid couplers from MECA Electronics is designed for applications from 2 to 4 GHz. They exhibit coupling variations of 3.1 0.6 dB with amplitude variations of 0.4 dB. The typical isolation between ports is 22 dB. The ...

The 7055-3.000 line of WiMAX hybrid couplers from MECA Electronics is designed for applications from 2 to 4 GHz. They exhibit coupling variations of 3.1 0.6 dB with amplitude variations of 0.4 dB. The typical isolation between ports is 22 dB. The maximum VSWR is 1.20:1. The phase response is within 90 2 deg. The hybrid couplers are supplied in aluminum housings with passivated stainless-steel SMA female connectors. They are rated for 50 W average power and 3 kW peak power.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...