Cables Aid Testing Past 40 GHz

Nov. 24, 2010
The expanded line of TestPro RF cable assemblies from Radiall USA now includes the TestPro 3 cables with performance from DC to 40 GHz. TestPro 3 cables are designed for extreme stability and flexibility and have been tested for bending stability ...

The expanded line of TestPro RF cable assemblies from Radiall USA now includes the TestPro 3 cables with performance from DC to 40 GHz. TestPro 3 cables are designed for extreme stability and flexibility and have been tested for bending stability according to IEC 966-1, bending method number 2. Results show excellent phase stability as low as 5 degrees typical with bending at 40 GHz. Amplitude variations are less than 0.1 dB with bending and only 0.03 dB with shaking at 40 GHz. TestPro 3 cable and its connectors are designed for long life, rated for a minimum of 20,000 bending cycles and 5000 mating cycles for such applications as in vector network analyzer (VNA) test systems.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Can I Use the VNA Software Without an Instrument?

April 19, 2024
Our VNA software application offers a demo mode feature, which does not require a physical VNA to use. Demo mode is easy to access and allows you to simulate the use of various...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...