Don't Toss Those MW Tubes Just Yet!

Nov. 19, 2008
Microwave tubes are all too easily now considered part of historical exhibits at trade shows. But according to a new report from ABI Research, "Microwave and Millimeter Wave High-Power Vacuum Electron Devices and the Gallium Nitride Threat," this market ...

Microwave tubes are all too easily now considered part of historical exhibits at trade shows. But according to a new report from ABI Research, "Microwave and Millimeter Wave High-Power Vacuum Electron Devices and the Gallium Nitride Threat," this market is far from history. In fact, the report notes that the total available market (TAM) for microwave and millimeter-wave high-power vacuum tubes is almost $1 billion. Although these electron devices are vital to many applications, the market is often misunderstood and inaccurately reported.

For many applications, especially at higher frequencies, tubes provide power levels that cannot be achieved except by large numbers of combined transistors. Particularly at millimeter-wave frequencies, tubes are often the only way to generate significant output-power levels. The industry supporting electron tubes has admittedly gone through changes and consolidation in recent years as designers have sought solid-state solutions for applications once powered by tubes, but the industry is fairly stable now. The ABI Research report points out GaN devices as possible replacements for some tubes, but many may remember that the same claims were made for gallium arsenide (GaAs) transistors more than 20 years ago. Time will tell, of course, but it would appear that the need for electron tubes is still strong and likely will remain so for some time.

About the Author

Jack Browne | Technical Contributor

Jack Browne, Technical Contributor, has worked in technical publishing for over 30 years. He managed the content and production of three technical journals while at the American Institute of Physics, including Medical Physics and the Journal of Vacuum Science & Technology. He has been a Publisher and Editor for Penton Media, started the firm’s Wireless Symposium & Exhibition trade show in 1993, and currently serves as Technical Contributor for that company's Microwaves & RF magazine. Browne, who holds a BS in Mathematics from City College of New York and BA degrees in English and Philosophy from Fordham University, is a member of the IEEE.

Sponsored Recommendations

Wideband MMIC LNA with Bypass

June 6, 2024
Mini-Circuits’ TSY-83LN+ wideband, MMIC LNA incorporates a bypass mode feature to extend system dynamic range. This model operates from 0.4 to 8 GHz and achieves an industry leading...

Expanded Thin-Film Filter Selection

June 6, 2024
Mini-Circuits has expanded our line of thin-film filter topologies to address a wider variety of applications and requirements. Low pass and band pass architectures are available...

Mini-Circuits CEO Jin Bains Presents: The RF Engine of the 21st Century

June 6, 2024
In case you missed Jin Bains' inspiring keynote talk at the inaugural IEEE MTT-S World Microwave Congress last week, be sure to check out the session recording, now available ...

Selecting VCOs for Clock Timing Circuits A System Perspective

May 9, 2024
Clock Timing, Phase Noise and Bit Error Rate (BER) Timing is critical in digital systems, especially in electronic systems that feature high-speed data converters and high-resolution...