Cable Assemblies Link 26.5 GHz

July 21, 2010
The 190 series CCK26.5 and CCSMA cable assemblies from Crystek operate to 26.5 GHz with 2.92-mm (K) and SMA connectors, respectively. The cable assemblies, which have a minimum bend radius of 1.1 in., exhibit attenuation of 0.5 dB/ft. at 26.5 GHz with ...

The 190 series CCK26.5 and CCSMA cable assemblies from Crystek operate to 26.5 GHz with 2.92-mm (K) and SMA connectors, respectively. The cable assemblies, which have a minimum bend radius of 1.1 in., exhibit attenuation of 0.5 dB/ft. at 26.5 GHz with greater than 90-dB shielding effectiveness (SE). The cables, with a rugged stainless-steel solder-clamp construction and heavy-duty strain reliefs, operate over temperatures from -55 to +85C (an extended operating temperature range of -55 to +125C is available through special order.

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...