Determine Radiation Effects For Ingestible Wireless Devices

Dec. 17, 2009
To assess the compliance of an ingested wireless device (IWD) with related international safety guidelines, a team of researchers used the finitedifference- time-domain (FDTD) method for two realistic body models in an electromagnetic (EM) ...

To assess the compliance of an ingested wireless device (IWD) with related international safety guidelines, a team of researchers used the finitedifference- time-domain (FDTD) method for two realistic body models in an electromagnetic (EM) simulator. Both biological effects and the IWD's signal intensity were studied by Lisheng Xu from China's Northeastern University together with Max Q.H. Meng, Hongliang Ren, and Yawen Chan from the Chinese University of Hong Kong.

To detail the radiation characteristics of an IWD in the small intestine, the researchers designed four capsule antennas corresponding to 430 and 800 MHz and 1.2 and 2.54 GHz. The FDTD method was applied to analyze the EM interference of the IWD with the human body. The temperature rise resulting from the specific absorption rate (SAR) deposition was calculated using a bio-heat equation. To analyze the SAR and temperature rise in the realistic human models, the XFDTD software from Remcom was used. The SAR and temperature rise value were normalized to the input power of 25 mW for RF source.

The team carried out simulation studies in 21 scenarios. For each of the two human models, the IWD was placed at seven positions with three orientations. The results indicated that the radiation intensity outside of the human body decreased as the operation frequency rose. Among all of the simulated scenarios created by the researchers, the maxima of the averaged 1-g and averaged 10-g SARs can reach 3.71 W/kg and 1.37 W/ kg at the input power of 25 mW. See "Radiation Characteristics of Ingestible Wireless Devices in Human Intestine Following Radio Frequency Exposure at 430, 800, 1200, and 2400 MHz," IEEE Transactions On Antennas And Propagation, August 2009, p. 2418.

About the Author

Nancy Friedrich | RF Product Marketing Manager for Aerospace Defense, Keysight Technologies

Nancy Friedrich is RF Product Marketing Manager for Aerospace Defense at Keysight Technologies. Nancy Friedrich started a career in engineering media about two decades ago with a stint editing copy and writing news for Electronic Design. A few years later, she began writing full time as technology editor at Wireless Systems Design. In 2005, Nancy was named editor-in-chief of Microwaves & RF, a position she held (along with other positions as group content head) until 2018. Nancy then moved to a position at UBM, where she was editor-in-chief of Design News and content director for tradeshows including DesignCon, ESC, and the Smart Manufacturing shows.

Sponsored Recommendations

Free Poster: Power Electronics Design and Testing

Dec. 23, 2024
Get with this poster a guidance about usual converter types, most important measurements and general requirements for power electronics design and testing. Register for a download...

eGuide: Optimizing and Testing RF Power Amplifier Designs

Dec. 23, 2024
This eGuide explores electronic design automation to real RF devices, focusing on verification, characterization, repeatability, and throughput, while highlighting key steps from...

Free Poster: Wireless Communications Standards

Dec. 23, 2024
Get insights about the latest cellular, non-cellular, IoT and GNSS specifications including 5G, LTE and Wi-Fi. Sign up to receive your poster in the mail or via download.

5G NR Testing – Are You Ready for the 5G Challenges?

Dec. 23, 2024
5G NR deployment is accelerating, unlocking new use cases, applications, and opportunities for devices and infrastructure. The question is: are you prepared for these advancements...